Free Member
Listed Since 2008 |
|
Hongkong Epro Industrial Co., Ltd.
China |
|
| | |
|
| Rubber_Injection_Machine |
(Product Photo) |
| | EPZ-Injection Machine
Detail 63T
100T
150T
200T
Clamping Force
630KN
1000KN
1500KN
2000KN
Systerm Pressure
21MPa
21MPa
21MPa
21MPa
Clamping Stroke
250mm
300mm
300mm
300mm
Fast Clamping speed
e60mm/s
e60mm/s
e60mm/s
e60mm/s
Injection Pressure
110MPa
110MPa
110MPa
110MPa
Injection Stroke
305mm
435mm
435mm
450mm
Injection Capacity
808cc
1416cc
1616cc
1844cc
Hopper Specification
70mm×215mm
80mm×282mm
85mm×285mm
90mm×290mm
Ejector Stroke
250mm
250mm
300mm
300mm
Ejector Force
60KN
60KN
60KN
60KN
Heater Platen Distance
120~350mm
350~600mm
200~500mm
180~480mm
Heater Platen size
400mm×450mm
500mm×500mm
550mm×550mm
550mm×600mm
Max Temperature(Heater Platen)
250
250
250
250
Motor Power
5.5KW
5.5KW
5.5KW
7.5KW
Heatting Power
7.5KW
10.4KW
12KW
18.3KW
2RT
1initial state
2start-up(ejector reposit)
3load the mould
4main cylinder goes up rapidly
5main cylinder goes
2RT
1initial state
2start-up(ejector reposit)
3load the mould
4main cylinder goes up rapidly
5main cylinder goes up slowly, increase pressure
6put material in , injection pole goes down, expel bubbles out and vulcanizing
7injection pole goes up, open the mould
8push out the mould
9eject the mould, pick up the finished products
3RT
1initial state
2m2 the second mould platen goes down
3 m1 the first mould platen goes down
4 load the mould
5 main cylinder goes up rapidly, increase pressure
6 Put material in, injection pole goes down, expel bubbles out and vulcanizing
7 injection pole goes up, open the mould
8 push out the mould
9 m1 the first mould platen goes up
10m2 the second mould platen goes up and opens the mould
4RT
1initial state
2lower platen(L) goes down,m2 the second mould platen goes up, m3 the third mould platen goes forward with the slide plate
3m2 the second mould platen and m1 the first mould platen go down
4load the mould, main cylinder goes up and increase the pressure
5put material in , injection pole goes down, expel bubbles out and vulcanizing
6open the mould ,injection pole goes up, push out the mould
7m1 the first mould platen goes up
8m2 the second mould platen goes up and opens the mould
9m3 the third mould platen goes back with the slide plate
10m2 the second mould platen goes down and locating
11lower plate (L)goes up ,take out the finished product, clean the mould | | |
|
| Origin: | China |
| Payment Method: | Bank Cheque |
Your inquiry will be recorded in "Member Trade Mail". |
Recommend to your friends |
|
| Company Contact |
| Name: |
Ms. JESSIE TOWN [Sales] |
| E-mail: |
Send Message |
| Homepage: |
http://nbepro.en.alibaba.com/ |
| Instant Messaging |
|
| Mobile Number: |
HP: +86 13957445830 |
| Phone Number: |
+86 574 87403882 |
| Fax Number: |
FAX: +86 574 87403883 |
| Address: |
No.139 Chun Yuan Road YinZhou., Ningbo, Zhejiang China
Ningbo 315100, Zhejiang
China |
|
)